Hardware-Accelerated Video Encoding | 0.16.4.0+

OvenMediaEngine Enterprise 0.16.4.0-1 버전부터 다양한 Hardware-Accelerated Video Encoding 기능을 사용할 수 있습니다.

OvenMediaEngine Enterprise를 RPM/DEB 패키지 파일로 설치할 경우, 해당 장비에 NVIDIA 그래픽 카드 또는 Xilinx Alveo U30MA 카드와 드라이버만 설치되어 있으면 Hardware-Accelerated Video Encoding이 자동으로 활성화됩니다. 그래픽 드라이버는 RPM/DEB 패키지 설치 후에도 재설치, 업데이트 및 삭제가 가능하며 프로그램 실행에 영향을 주지 않습니다. 이 문서에서는 지원 버전, 지원 코덱, 드라이버 설치 및 확인 방법에 대해 설명합니다.

지원 OS 및 드라이버 버전

Device

Support OS

Driver Verion

NVIDIA

Ubuntu 20.04,

Ubuntu 22.04 Rocky 9

NVIDIA Driver 470+ CUDA Driver 10.1+

Xilinx Alveo U30MA

Ubuntu 20.04,

Ubuntu 22.04

Xilinx Video SDK 3.0

지원 코덱

Device

Decoder

Filter

Encoder

NVIDIA

H.264, H.265

Scaler

H.264, H.265

Xilinx Alveo U30MA

H.264, H.265

Scaler

H.264, H.265

드라이버 설치 및 확인 방법

NVIDIA 그래픽 드라이버

이 문서의 내용은 Open-Source로 릴리즈된 OvenMediaEngine에서 제공되는 misc/install_nvidia_driver.sh 스크립트를 기반으로 작성되었습니다. 설치가 안 될 경우, NVIDIA 공식 문서를 참고하시기 바랍니다.

Ubuntu Linux 20.04 / 22.04

sudo apt-get -y update
sudo apt-get -y install --no-install-recommends apt-utils lshw
sudo apt-get -y install --no-install-recommends keyboard-configuration
sudo apt-get -y install --no-install-recommends ubuntu-drivers-common
sudo apt-get -y install --no-install-recommends gnupg2 ca-certificates software-properties-common


# Uninstalling a previously installed NVIDIA Driver
sudo apt-get -y remove --purge nvidia-*
sudo apt-get -y autoremove
sudo apt-get -y update

# Remove the nouveau driver.
# If the nouveau driver is in use, the nvidia driver cannot be installed.
USE_NOUVEAU=`sudo lshw -class video | grep nouveau`
if [ ! -z "$USE_NOUVEAU" ]; then

        # Disable nouveau Driver
        echo "blacklist nouveau" >> /etc/modprobe.d/blacklist.conf
        echo "blacklist lbm-nouveau" >> /etc/modprobe.d/blacklist.conf
        echo "options nouveau modeset=0" >> /etc/modprobe.d/blacklist.conf
        echo "alias nouveau off" >> /etc/modprobe.d/blacklist.conf
        echo "alias lbm-nouveau off" >> /etc/modprobe.d/blacklist.conf
        sudo update-initramfs -u
        echo "Using a driver display nouveau.Remove the driver and reboot.Reboot and installation script to rerun the nvidia display the driver to complete the installation."

        sleep 5s
        reboot
fi

# Custom Driver Version
NVIDIA_DRIVER_VERSION=

# Install nvidia drivers and cuda-toolit
sudo add-apt-repository -y  ppa:graphics-drivers/ppa

sudo apt -y update
if [ -z "$NVIDIA_DRIVER_VERSION" ]
then 
    # installation with recommended version
    sudo ubuntu-drivers autoinstall
else
    # installation with specific version
    sudo apt-get install -y --no-install-recommends nvidia-driver-${NVIDIA_DRIVER_VERSION}
fi     
sudo apt-get install -y --no-install-recommends nvidia-cuda-toolkit

Rocky Linux (검증 필요)

sudo yum -y update
sudo yum -y install kernel-devel
sudo yum -y install epel-release
sudo yum -y install dkms curl lshw
sudo yum -y install subscription-manager

echo "Reboot is required to run with a new version of the kernel."

# Remove the nouveau driver.
USE_NOUVEAU=`lshw -class video | grep nouveau`
if [ ! -z "$USE_NOUVEAU" ]; then

        # Disable nouveau Driver
        sudo sed "s/GRUB_CMDLINE_LINUX=\"\(.*\)\"/GRUB_CMDLINE_LINUX=\"\1 rd.driver.blacklist=nouveau nouveau.modeset=0\"/" /etc/default/grub
        sudo grub2-mkconfig -o /boot/grub2/grub.cfg
        sudo echo "blacklist nouveau" >> /etc/modprobe.d/blacklist.conf
        sudo mv /boot/initramfs-$(uname -r).img /boot/initramfs-$(uname -r)-nouveau.img
        sudo dracut /boot/initramfs-$(uname -r).img $(uname -r)

        echo "Using a driver display nouveau. so, remove the driver and reboot. "
        echo "After reboot and installation script to rerun the nvidia display the driver to complete the installation."

        sleep 5s
        sudo reboot
fi

sudo subscription-manager repos --enable=rhel-7-server-optional-rpms
sudo yum-config-manager --add-repo https://developer.download.nvidia.com/compute/cuda/repos/rhel7/x86_64/cuda-rhel7.repo
sudo yum clean expire-cache

sudo yum -y install nvidia-driver-latest-dkms
sudo yum -y install cuda
sudo yum -y install cuda-drivers

드라이버 설치 확인

# nvcc --version
nvcc: NVIDIA (R) Cuda compiler driver
Copyright (c) 2005-2019 NVIDIA Corporation
Built on Sun_Jul_28_19:07:16_PDT_2019
Cuda compilation tools, release 10.1, V10.1.243

# nvidia-smi 
Wed Jul  3 23:30:00 2024       
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 470.256.02   Driver Version: 470.256.02   CUDA Version: 11.4     |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|                               |                      |               MIG M. |
|===============================+======================+======================|
|   0  NVIDIA GeForce ...  Off  | 00000000:0A:00.0 Off |                  N/A |
| 55%   33C    P8    10W / 120W |      2MiB /  3018MiB |      0%      Default |
|                               |                      |                  N/A |
+-------------------------------+----------------------+----------------------+                                                                  
+-----------------------------------------------------------------------------+
| Processes:                                                                  |
|  GPU   GI   CI        PID   Type   Process name                  GPU Memory |
|        ID   ID                                                   Usage      |
|=============================================================================|
|  No running processes found                                                 |
+-----------------------------------------------------------------------------+

XILINX Video SDK 3.0 드라이버

Xilinx Video SDK 3.0 드라이버는 공식적으로 Ubuntu, Red Hat Linux 7.8, 및 Amazon Linux 2를 지원합니다. 자세한 내용은 Xilinx 공식 문서를 참고하세요.

Hardware-Accelerated Video Encoding 활성화 확인 방법

RPM/DEB 패키지와 드라이버 설치가 완료되면, OvenMediaEngine에서 드라이버가 정상적으로 로드되어 Hardware-Accelerated Video Encoding 기능이 활성화되었는지 확인해야 합니다. 이를 확인하기 위해 OvenMediaEngine 의 로그 파일로부터 확인 할 수 있습니다.

$ cd /var/log/ovenmediaengine
$ cat ovenmediaengine.log | grep transcoder_gpu

[OvenMediaEngine:1234] TAG| transcoder_gpu.cpp:43   | Trying to check the hardware accelerator
[OvenMediaEngine:1234] TAG| transcoder_gpu.cpp:278  | NVIDIA. DeviceId(0), Name(NVIDIA GeForce GTX 1060 3GB), BusId(10), CudaId(0)
[OvenMediaEngine:1234] TAG| transcoder_gpu.cpp:48   | Supported NVIDIA Accelerator. Number of devices(1)
[OvenMediaEngine:1234] TAG| transcoder_gpu.cpp:62   | No supported Xilinx Media Accelerator
[OvenMediaEngine:1234] TAG| transcoder_gpu.cpp:72   | No supported Intel QuickSync Accelerator
[OvenMediaEngine:1234] TAG| transcoder_gpu.cpp:82   | No supported Netint VPU Accelerator

PreviousPallyCon DRM Configuration | 0.16.4.0+NextInsert SEI into H.264 (AVC) Streams | v0.18.0.0+

Last updated 21 days ago

드라이버 설치 및 확인 방법

NVIDIA 그래픽 드라이버

Ubuntu Linux 20.04 / 22.04

sudo apt-get -y update
sudo apt-get -y install --no-install-recommends apt-utils lshw
sudo apt-get -y install --no-install-recommends keyboard-configuration
sudo apt-get -y install --no-install-recommends ubuntu-drivers-common
sudo apt-get -y install --no-install-recommends gnupg2 ca-certificates software-properties-common


# Uninstalling a previously installed NVIDIA Driver
sudo apt-get -y remove --purge nvidia-*
sudo apt-get -y autoremove
sudo apt-get -y update

# Remove the nouveau driver.
# If the nouveau driver is in use, the nvidia driver cannot be installed.
USE_NOUVEAU=`sudo lshw -class video | grep nouveau`
if [ ! -z "$USE_NOUVEAU" ]; then

        # Disable nouveau Driver
        echo "blacklist nouveau" >> /etc/modprobe.d/blacklist.conf
        echo "blacklist lbm-nouveau" >> /etc/modprobe.d/blacklist.conf
        echo "options nouveau modeset=0" >> /etc/modprobe.d/blacklist.conf
        echo "alias nouveau off" >> /etc/modprobe.d/blacklist.conf
        echo "alias lbm-nouveau off" >> /etc/modprobe.d/blacklist.conf
        sudo update-initramfs -u
        echo "Using a driver display nouveau.Remove the driver and reboot.Reboot and installation script to rerun the nvidia display the driver to complete the installation."

        sleep 5s
        reboot
fi

# Custom Driver Version
NVIDIA_DRIVER_VERSION=

# Install nvidia drivers and cuda-toolit
sudo add-apt-repository -y  ppa:graphics-drivers/ppa

sudo apt -y update
if [ -z "$NVIDIA_DRIVER_VERSION" ]
then 
    # installation with recommended version
    sudo ubuntu-drivers autoinstall
else
    # installation with specific version
    sudo apt-get install -y --no-install-recommends nvidia-driver-${NVIDIA_DRIVER_VERSION}
fi     
sudo apt-get install -y --no-install-recommends nvidia-cuda-toolkit

Rocky Linux (검증 필요)

sudo yum -y update
sudo yum -y install kernel-devel
sudo yum -y install epel-release
sudo yum -y install dkms curl lshw
sudo yum -y install subscription-manager

echo "Reboot is required to run with a new version of the kernel."

# Remove the nouveau driver.
USE_NOUVEAU=`lshw -class video | grep nouveau`
if [ ! -z "$USE_NOUVEAU" ]; then

        # Disable nouveau Driver
        sudo sed "s/GRUB_CMDLINE_LINUX=\"\(.*\)\"/GRUB_CMDLINE_LINUX=\"\1 rd.driver.blacklist=nouveau nouveau.modeset=0\"/" /etc/default/grub
        sudo grub2-mkconfig -o /boot/grub2/grub.cfg
        sudo echo "blacklist nouveau" >> /etc/modprobe.d/blacklist.conf
        sudo mv /boot/initramfs-$(uname -r).img /boot/initramfs-$(uname -r)-nouveau.img
        sudo dracut /boot/initramfs-$(uname -r).img $(uname -r)

        echo "Using a driver display nouveau. so, remove the driver and reboot. "
        echo "After reboot and installation script to rerun the nvidia display the driver to complete the installation."

        sleep 5s
        sudo reboot
fi

sudo subscription-manager repos --enable=rhel-7-server-optional-rpms
sudo yum-config-manager --add-repo https://developer.download.nvidia.com/compute/cuda/repos/rhel7/x86_64/cuda-rhel7.repo
sudo yum clean expire-cache

sudo yum -y install nvidia-driver-latest-dkms
sudo yum -y install cuda
sudo yum -y install cuda-drivers

드라이버 설치 확인

# nvcc --version
nvcc: NVIDIA (R) Cuda compiler driver
Copyright (c) 2005-2019 NVIDIA Corporation
Built on Sun_Jul_28_19:07:16_PDT_2019
Cuda compilation tools, release 10.1, V10.1.243

# nvidia-smi 
Wed Jul  3 23:30:00 2024       
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 470.256.02   Driver Version: 470.256.02   CUDA Version: 11.4     |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|                               |                      |               MIG M. |
|===============================+======================+======================|
|   0  NVIDIA GeForce ...  Off  | 00000000:0A:00.0 Off |                  N/A |
| 55%   33C    P8    10W / 120W |      2MiB /  3018MiB |      0%      Default |
|                               |                      |                  N/A |
+-------------------------------+----------------------+----------------------+                                                                  
+-----------------------------------------------------------------------------+
| Processes:                                                                  |
|  GPU   GI   CI        PID   Type   Process name                  GPU Memory |
|        ID   ID                                                   Usage      |
|=============================================================================|
|  No running processes found                                                 |
+-----------------------------------------------------------------------------+

XILINX Video SDK 3.0 드라이버

Xilinx Video SDK 3.0 드라이버는 공식적으로 Ubuntu, Red Hat Linux 7.8, 및 Amazon Linux 2를 지원합니다. 자세한 내용은 Xilinx 공식 문서를 참고하세요.

Hardware-Accelerated Video Encoding 활성화 확인 방법

$ cd /var/log/ovenmediaengine
$ cat ovenmediaengine.log | grep transcoder_gpu

[OvenMediaEngine:1234] TAG| transcoder_gpu.cpp:43   | Trying to check the hardware accelerator
[OvenMediaEngine:1234] TAG| transcoder_gpu.cpp:278  | NVIDIA. DeviceId(0), Name(NVIDIA GeForce GTX 1060 3GB), BusId(10), CudaId(0)
[OvenMediaEngine:1234] TAG| transcoder_gpu.cpp:48   | Supported NVIDIA Accelerator. Number of devices(1)
[OvenMediaEngine:1234] TAG| transcoder_gpu.cpp:62   | No supported Xilinx Media Accelerator
[OvenMediaEngine:1234] TAG| transcoder_gpu.cpp:72   | No supported Intel QuickSync Accelerator
[OvenMediaEngine:1234] TAG| transcoder_gpu.cpp:82   | No supported Netint VPU Accelerator